IFR Checkride Guide
← Area VI. Instrument Approach Procedures

Task VI.D

Circling Approach

To determine the applicant exhibits satisfactory knowledge, risk management, and skills associated with performing a circling approach procedure.

References: 14 CFR parts 91, 97; AIM; FAA-H-8083-2, FAA-H-8083-3, FAA-H-8083-15, FAA-H-8083-16, FAA-H-8083-25; Terminal Procedures Publications

Quick Review

Conversational Q&A — quiz yourself before the oral.

Deep Dive

The four circling patterns

The IFH's patterns (IFH ch. 10) give you a decision tree keyed to when you see the runway and where you want to land.

Missing from the middle of the circle

Category discipline in a trainer

Compute 1.3 Vso at max landing weight for your airplane and know your category cold — then know which circling speed you actually fly and whether it stays inside the band.

Keeping the circle stabilized

Automation in the circle (VI.D R4)

Official ACS elementsreference

Knowledge1 element

The applicant demonstrates understanding of:

  • IR.VI.D.K1Elements related to circling approach procedures and limitations, including approach categories and related airspeed restrictions.
Risk Management7 elements

The applicant is able to identify, assess, and mitigate risk associated with:

  • IR.VI.D.R1Prescribed circling approach procedures.
  • IR.VI.D.R2Executing a circling approach at night or with marginal visibility.
  • IR.VI.D.R3Losing visual contact with an identifiable part of the airport.
  • IR.VI.D.R4Management of automated navigation and autoflight systems.
  • IR.VI.D.R5Management of altitude, airspeed, or distance while circling.
  • IR.VI.D.R6Low altitude maneuvering, including stall, spin, or controlled flight into terrain (CFIT).
  • IR.VI.D.R7Executing a missed approach after the MAP while circling.
Skills8 elements

The applicant exhibits the skill to:

  • IR.VI.D.S1Comply with the circling approach procedure considering turbulence, windshear, and the maneuvering capability and approach category of the aircraft.
  • IR.VI.D.S2Confirm the direction of traffic and adhere to all restrictions and instructions issued by ATC or the evaluator.
  • IR.VI.D.S3Use single-pilot resource management (SRM) or crew resource management (CRM), as appropriate.
  • IR.VI.D.S4Establish the approach and landing configuration. Maintain a stabilized approach and a descent rate that ensures arrival at the MDA, or the preselected circling altitude above the MDA, prior to the missed approach point.
  • IR.VI.D.S5Maintain airspeed ±10 knots, desired heading/track ±10°, and altitude +100/-0 feet until descending below the MDA or the preselected circling altitude above the MDA.
  • IR.VI.D.S6Visually maneuver to a base or downwind leg appropriate for the landing runway and environmental conditions.
  • IR.VI.D.S7If a missed approach occurs, turn in the appropriate direction using the correct procedure and appropriately configure the airplane.
  • IR.VI.D.S8If landing, initiate a stabilized descent. Touch down on the first one-third of the selected runway without excessive maneuvering, without exceeding the normal operating limits of the airplane, and without exceeding 30° of bank.